Panasonic DC-BGH1 Operating Instructions Manual Download Page 63

Page: 63 / 284

- 63 -

4. Recording Videos - Time Code

[Time Code Display]

Displays the time code on the recording screen.

[Count Up]

[REC RUN]:

Counts the time code only when recording videos.

[FREE RUN]:

Counts the time code also when video recording is stopped and when the

camera is turned off.

●

When the following function is being used, [Count Up] is fixed to [REC RUN]:

– [Variable Frame Rate]

[Time Code Value]

[Reset]:

Sets to 00:00:00:00 (hour: minute: second: frame)

[Manual Input]:

Manually input hour, minute, second and frame.

[Current Time]:

Sets hour, minute and second to current time and sets frame to 00.

[Time Code Mode]

[DF]:

Drop Frame. The camera modifies the difference between recorded time and time

code.

●

Seconds and frames are separated by “.”.

Example: 00:00:00.00

[NDF]:

Non-Drop Frame. Records the time code without drop frame.

●

Seconds and frames are separated by “:”.

Example: 00:00:00:00

●

When the following functions are being used, [Time Code Mode] is fixed to [NDF]:

– [50.00Hz (PAL)] / [24.00Hz (CINEMA)] ([System Frequency])

– 23.98p [Rec Quality]

[HDMI Time Code Output] /

[SDI Time Code Output]

Images to be output via HDMI/SDI will be added with time code information then output.

●

The device screen may go dark depending on the connected device.

[External TC Setting]

Synchronize the time code default value with an external device that supports time code

input and output. (

Synchronizing the Time Code with an External Device

)

[TC Synchronization]:

Selects the input (

Synchronize the Time Code of the

Camera with That of the External Device (TC IN)

) and output (

Synchronize the

Time Code of the External Device with That of the Camera (TC OUT)

) for time code

signals. (LTC signal)

[TC Output Reference]:

Sets the timing for time code signal output. (

Synchronize the Time Code of the External Device with That of the Camera (TC OUT)

)

Summary of Contents for DC-BGH1





























































































































































































































































































Search results

Summary of Contents for DC-BGH1

Reviews:

Related manuals for DC-BGH1

Brands by name

Popular brands

Panasonic DC-BGH1, Operating Instructions Manual

Search results

Summary of Contents for DC-BGH1

Reviews:

Related manuals for DC-BGH1

Brands by name

Popular brands