Panasonic DC-BGH1 Operating Instructions Manual Download Page 237

Page: 237 / 284

- 237 -

12. Remote Operations - [LAN / Wi-Fi Setup] menu

[LAN / Wi-Fi Setup] menu

This configures the settings required for the wired LAN / Wi-Fi function. The settings cannot be changed when connected to

wired LAN / Wi-Fi.

Displaying the [LAN / Wi-Fi Setup] menu.

●

[MENU/SET] [ ] [ ] [LAN / Wi-Fi] [LAN / Wi-Fi Setup]

●

Cannot be set during connection via USB.

[IP Address Setting (LAN)]

Set the IP address for wired LAN connection. You can select whether to

automatically assign an IP address using a DHCP or to set any fixed IP

address.

[DHCP Server]:

Select this to connect the camera as a DHCP server (default setting).

[DHCP Client]:

Select this to connect the camera as a DHCP client.

[Static IP Address]:

Select this to connect using the IP address set in [Static IP Address Setting].

[Static IP Address Setting]:

You can set IP address used for [Static IP Address].

[IP Address]: The default setting is <192.168.0.2>.

[Subnet Mask]: The default setting is <255.255.255.0>.

[Default Gateway]: The default setting is <192.168.0.1>.

●

Set the IP address, subnet mask, and default gateway with the correct

combination.

●

For details about DHCP settings or settings of a fixed IP address, contact

the administrator of the network you are using.

●

If you changed the setting of [IP Address Setting (LAN)], turn the camera

off and then on again.

[Wi-Fi Password]

You can use a password to connect for enhanced security. (

220

Using

Password Authentication to Connect

)

[LAN / Wi-Fi Function Lock]

To prevent incorrect operation and use of the wired LAN / Wi-Fi function by a

third party and to protect personal information in the camera and included with

images, protect the wired LAN / Wi-Fi function with a password.

[Setup]:

Enter any 4-digit numbers as the password.

●

For information on how to enter characters (

203

Entering Characters

)

[Cancel]:

Cancel the password.

●

Once a password is set, you are required to enter it each time you use the

wired LAN / Wi-Fi function.

●

If you forget your password, you can use [Reset] in the [Setup] ([Setting])

menu to reset the network settings and thereby reset the password.

[Network Address Display (LAN)]

Displays the MAC address and IP address of the camera during wired LAN

connection.

[Network Address Display (Wi-Fi)]

Displays the MAC address and IP address of the camera during Wi-Fi

connection.

Summary of Contents for DC-BGH1





























































































































































































































































































Search results

Summary of Contents for DC-BGH1

Reviews:

Related manuals for DC-BGH1

Brands by name

Popular brands

Panasonic DC-BGH1, Operating Instructions Manual

Search results

Summary of Contents for DC-BGH1

Reviews:

Related manuals for DC-BGH1

Brands by name

Popular brands