Panasonic DBS 96, Manual, Page: 25 / 159

2.
Printed circuit cards are installed in dedicated slots in the DBS cabinet.
Table 2-3 shows the cards that can be installed in each slot. Figure 2-3 on
page 2-9 illustrates slot labels.
Table 2-3. Printed circuit package slot usage
Card Type
Analog
Trunks
Digital Trunks
Digital Lines
Analog Lines
Service
Circuits
Processor Cards
DTMF Circuits
Interface Cards
Notes:
Card
DID/8
SCC-A
SCC-B
CPC-A
CPC-B
CPC-AI1
API (1 or 2 Circuits)
CBL-M
CBL-S
Acceptable Slots
TRK or
EC l-8 or
EC 2-8 or
or
CPC (See Note 1.)
or (See Note 2.)
CPC or (See Note 3.)
With one-cabinet systems, the MFR card can be installed in the or slot,
depending on whether an API card is used. With two-cabinet systems, placement of the MFR
cards differs according to the cable kit used.
Cable Kit Version 1.1, one MFR is installed
in the Master and one MFR is installed in the Slave With Cable Kit Version 1.2,
both MFR cards are installed in the slave cabinet--one in the CPC slot and one in . (See
page 10 for instructions on installing MFR cards in double-cabinet systems.)
2. The API card is installed in only when a CBL card is used.
3. Part VB-43 110 includes both the CBL-M and CBL-S cards, as well as the required connect-
ing cables. CBL-M is installed in the master cabinet, CBL-S in the slave cabinet.
2-8 Manual Issued