![background image](http://html.mh-extra.com/html/panasonic/dbs-40/dbs-40_manual_264468069.webp)
4.
I
4.
Set SW1 on the
card according to the following table.
These switch settings correspond to the distance between the DBS and the
CSU. To turn a switch on, fiip it to the “up” position.
Table 4-18. Switch
settings for
SWZ on the
card
SW
Distance from the DBS to the CSU
0 to 150
150-450
450-655
SW1
On
Off
Off
Off
On
Off
off
Off
On
Off
On
Off
Off
Off
On
SW6
Off
On
Off
Not used
Not used
Not used
5.
the card in the
slot
6. Connect the Sync Cable from
on the Sync Unit to CN5 on the
card.
4-8.
Unit and Tl connection. sin&-cabinet installation
7. Connect the cable attached to CN3 on the
MDF card to CN3 on the
card (Figure 4-10).
8. Using an RJ48 cable, connect
on the
MDF card to the CSU
(Figure 10). The following illustration shows
4-24
Manual Issued
Summary of Contents for DBS 40
