Section 300-Installation
Chapter 5. Peripheral Equipment
DBS-2.3/9.2-300
DBS Manual - Revised April 2000
5-3
Local Terminal or SMDR Device
Guidelines
• Connector 6 (CN6) on the Connector Panel provides an RS-232C interface
for connection of a local programming terminal or an SMDR device such
as a printer or call accounting machine.
• The following table contains RS-232C designations.
Table 5-1. RS-232C pin designations used for CN6
• For instructions on connecting a remote PCAS PC, see the
PCAS User’s
Guide.
• For instructions on connecting the remote DBS Manager, see the
DBS
Manager User Guide
.
Pin
Signal Name
Description
1
N/A
Not used.
2
TD
Transmit Data
3
RD
Receive Data
4
CTS
Clear to Send
5
RTS
Request to Send
6
DSR
Data Set Ready
7
SG
Signal Ground
8
CD
Carrier Detect
20
DTR
Data Terminal Ready
Summary of Contents for DBS 40
