6
If connection is unsuccessful, either one of the three pop-up
window will appear:
i) Connection with both units failed
11:35,Mon
Rotation
Select
Confirm
ON
OFF
Close
Disabled due to
connection with
both units failed!
ii) Connection with main unit failed
only
11:35,Mon
Rotation
Select
Confirm
ON
OFF
Close
Disabled due to
connection with
Main unit failed!
iii) Connection with sub unit failed only
11:35,Mon
Rotation
Select
Confirm
ON
OFF
Close
Disabled due to
connection with
Sub unit failed!
Please ensure that both CNT cables are connected properly at
indoor unit and wired remote controller according to CNT cable
Installation Manual. After that, repeat Steps 2.1 to 2.5. (Contact
an authorised dealer if problem persists).
2.6 After connection is successful, press
to close the pop-up
window. After returning to
Operation screen
, The Duty Rotation
icon should appear on the top left corner. This icon will appear
throughout the Duty Rotation operation.
11:35,Mon
FAN SPEED
AUTO
AUTO
SET TEMP.
25
.0
FLAP
MODE
AUTO
C
°
The operation setting for Duty Rotation mode will follow the
previous setting saved before operation OFF.
• After Duty Rotation is successfully set, sub unit remote
controller will be disabled.
Summary of Contents for CZ-RCC5
Page 82: ...Memo ...
Page 83: ...Memo ...