EN-15
EN
STEP 5
Select other copy destination groups if desired.
You can copy the selected source group programs
•
into other groups by repeatedly pressing the
GROUP button to select a group followed by the
SET button to set it.
NOTE
If a group from numbers 1 to 4 was selected as the
•
copy destination group, that number appears in the
program
area. If a group from numbers 5 to 8
was selected, that number appears in the program
area.
STEP 6
Press the PROG. COPY GROUP button to enter the
copied programs in the selected groups.
The normal display returns.
•
NOTE
If a program already exists in the copy destination group, the newly copied program overwrites the
•
existing program.
If you accidentally copy over a program in the group program copy mode, holding down the CANCEL
•
button for more than 2 seconds returns the program to the point prior to pressing the PROG. COPY
GROUP button in STEP 1. (All changes and copy operations made up until that point are cleared.)
CZ-ESWC2.indb EN-15
CZ-ESWC2.indb EN-15
2011/06/02 10:42:55
2011/06/02 10:42:55
