EN-14
How to Copy Group Programs
STEP 1
Press the PROG. COPY GROUP button.
“CP-1” starts blinking in the present time display
•
area and “CP” (copy) starts blinking in the program
area to indicate the copy source.
STEP 2
Select a source group program to copy.
Select a copy source group using the GROUP
•
button.
Once having selected the copy source group, press
•
the SET button to set it. The display changes to key
you to select a copy destination group.
STEP 3
Select a copy destination group.
After pressing the SET button, “CP-2” starts blinking
•
in the present time display area, the copy source
group No. set appears in the program
area, and
“PA” (paste) starts blinking in the program
area
to indicate the copy destination.
Select a copy destination group using the GROUP
•
button.
STEP 4
Enter the selected copy destination group.
When the SET button is pressed, the number of the
•
copy destination group appears in the program No.
area.
NOTE
If a group from numbers 1 to 4 was selected as the
•
copy destination group, that number appears in the
program
area. If a group from numbers 5 to 8
was selected, that number appears in the program
area.
CZ-ESWC2.indb EN-14
CZ-ESWC2.indb EN-14
2011/06/02 10:42:55
2011/06/02 10:42:55
