Panasonic CW-XN181AM Series Operating Instructions Manual Download Page 9

-: 6 :-

PREPARATION BEFORE OPERATION

WARNING

Ensure that the power plug
is securely inserted.

A loose plug may cause fire
or an electric shock.

NOTES :

If  the  unit  is  not  going  to  be  used  for  an
extended period of time, remove the power
plug.  Otherwise,  approximately  2.5W  of
electricity will be used even if the unit has
been turned off using the remove control.

HOW TO INSERT BATTERIES

1

2

3

Open the cover.

Insert the two batteries.

Close the cover.

CAUTION

Do not use rechargeable (Ni-Cd) batteries because such batteries differ
from the standard dry cell batteries in shape, dimension and performance.

If operation is stopped, and to be restarted
immediately, the unit will resume operation
only after 3 minutes.

ABOUT THE BATTERIES

The batteries can be used for approximately one year.
Be sure to replace the batteries with two new identical batteries.
Remove the batteries if the air conditioner will not be used for an extended 
period of time

OPERATION CONDITIONS

Use the air conditioner under the
following conditions :
    Operating temperature range.

O

(unit in  C)

Max. Temperature
Min. Temperature

Outdoor side

Indoor side

D.B.T

46

16

D.B.T

35

16

W.B.T

27

11

W.B.T

24

11

NOTE :

 Humidity may exceed 90%

D.B.T. : Dry Bulb Temperature
W.B.T. : Wet Bulb Temperature

Continuous operation at over 90% high
humidity may create condensation and
result in waterdrops on the intake and
outlet vanes.

Summary of Contents for CW-XN181AM Series





















Reviews: