Panasonic CW-XN181AM Series Operating Instructions Manual Download Page 14

-: 11 :-

A/C OPERATION

OPERATING THE UNIT

SELECTING OPERATION MODE

SELECTING FAN SPEED

ADJUSTING HORIZONTAL AIRFLOW DIRECTION

Start operation by pressing OFF/ON Button.
The operation will turn on and the display panel will light up.
To stop the operation, press the OFF/ON Button again.
The unit will stop operating and the display panel light will turn off.
Please note that the OFF indication is as follows :
To Start :
To Stop :

Press MODE to select the desired operation.
The indicator will light up and a "beep" sound will indicate
changing setting.

COOL mode

To set room temperature to your preference of cooling comfort.

FAN mode

To provide air circulation without cooling the room.
During Fan operation, temperature setting cannot be selected.

DRY mode

Fan motor Run at only low speed, and cannot be changed. The
comp On/Off duration is controlled by difference between room
temp and set temp.

Press FAN SPEED to choose the speed level of the fan.
The indicator will light up and the "beep" sound will indicate
changing setting.

NOTE:

    The latest fan speed setting  will be memorized and the
    indicator will light up the next time the unit is turned on.

Press to select AIR SWING.
The air circulation will automatically move the
horizontal louvers left and right for better air
distribution around the room.

NOTE:

Using your hands to adjust the direction may
cause the louvers to malfunction. If this
happens, stop operation immediately and restart.

OFF/ON

MODE

MED

HIGH

FAN SPEED

AIR SWING

Vertical

louvers

NOTE :

Vertical
adjustment
of the airflow
direction is
done manually.

SETTING DISPLAY TEMPERATURE

Press TEMP 

or 

to set the display temperature.

O

O

The temperature can be set between 16 C and 30 C

O

O

Recommended temperature: 26 C ~ 28 C
NOTES:

   The latest temperature setting will be memorized and will appear
   on the display the next time it's turned on.
   The Display temperature selection is for display purpose only
   and shows the temperature set by you.

POWER

TEMP/TIME

COOL

FAN

DRY

FAN SPEED

FAN

COOL

DRY

LOW

SWING

TEMP

OFF

OFF

Summary of Contents for CW-XN181AM Series





















Reviews: