39
13.2 Remote Control Button
13.2.1 SET
Button
•
To check remote control transmission code and store the transmission code to EEPROM
o
Press “Set” button for more than 10 seconds by using pointer
o
Press “Timer Set” button unit a “beep” sound is heard as confirmation of transmission code change.
13.2.2 CLOCK
Button
•
To change the remote control time format:
o
Press for more than 5 seconds
13.2.3 RESET (RC) Button
•
To clear and restore the remote control setting to factory default.
o
Press once to clear the memory
13.2.4 TIMER
▲
•
To change indoor unit indicators’ intensity:
o
Press continuously for 5 seconds.
13.2.5 TIMER
▼
•
To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F)
o
Press continuously for 10 seconds.
Summary of Contents for CS-PS9JKT
