background image

4

 About

Cool, Auto, Heat, Dry

•  Enables you to enjoy the cooling 

effect at your preferred setting 

temperature.

•  The unit will automatically select 

the operation mode according 

to the setting, outdoor and room 

temperature. During operation mode 

selection, power indicator blinks. 

For every 30 minutes, the operation 

mode is reselected.

•  Enables you to enjoy the warming 

effect at your preferred setting 

temperature.

•  For cold air prevention, air might 

not blow out immediately and power 

indicator blinks when operation starts.

•  Also operates in defrost mode 

(maximum 12 minutes) where by the 

power indicator blinks. The melted 

frost is drained at outdoor unit and 

indoor/outdoor fan is stopped.

1

Start the 

desired 

operation.

2

Set the 

temperature.

(16°C ~ 30°C)

COOL - Cooling Operation

AUTO - Automatic Operation

HEAT - Heating Operation

HOW TO OPERATE

 Quiet, Powerful, Ion and Oxygen operations could be 

activated in all operation modes.

 Press 

 button to stop / start the selected operation.

  To save electricity, close the curtains when using air conditioner to prevent sunlight and heat from coming in.

  Approximately 10% of electricity can be saved if you set the temperature 1°C higher in cooling operation or 2°C lower in heating 

operation than the desired temperature.

Hints

 Operation Details

•  Opens for air intake when operation 

starts, and closes when operation 

stops. During this time, do not hold 

it as it may cause malfunction or 

breakdown.

MOVABLE PANEL

•  Enables you to set the desired 

temperature at low fan speed which  

provides you with the dehumidifying 

surroundings.

DRY - Dry Operation

  Operation delayed for a few minutes after restart.

  This is a normal self protection control.

  Sounds like water flowing during operation.

  Caused by refrigerant flow inside.

  Noise during operations.

  Installation work could be slanted or front panel didn’t open properly.

  Cracking sound can be heard during operations. 

  Panel expanding/contracting due to change in temperature.

Troubleshooting

B1_X_1EN(1-7).indd   4

5/31/2005   9:37:08 AM

Summary of Contents for CS-HE12DKE









Reviews: