background image

5

ENGLISH

■ 

Operation Details

•  Enriches oxygen content in fresh air.
•  Oxygen operation could be activated 

independently. Press 

 button to 

stop the operation.

•  When the oxygen operation is 

stopped, the oxygen indicator 

would blink (maximum 5 minutes) to 

sustain the oxygen function.

OXYGEN

Oxygen, Ion, Powerful, Quiet, Fan Speed, 

Air Swing

Hint

 Powerful and Quiet operations could not be activated at the 

same time.

 Oxygen, Ion, Powerful and Quiet operations could be 

cancelled by pressing the respective button again.

HOW TO OPERATE

  It is possible to turn off/on the oxygen indicator by pressing 

 for 5 seconds without affecting the oxygen function.

•  To provide fresh air effect by 

producing negative ions.

•  Ion operation could be activated 

independently. Press 

 button to 

stop the operation.

•  During Ionizer only operation, Quiet 

and Powerful could not be activated.

•  To cool down / warm up the room 

faster.

ION

POWERFUL

•  To provide a quiet environment.

QUIET

•  To provide you with the various fan 

speed selections.

•  There are 5 levels of fan speed in 

addition to automatic fan speed.

•  Automatic fan speed:
  The speed of the indoor fan is 

automatically adjusted according to 

the operation.

FAN SPEED

AIR SWING

•  To change airflow direction.
•  There are 5 selections in addition to 

automatic vertical airflow direction.

•  If automatic vertical airflow direction 

has been set, the louver swings up 

and down automatically.

•  To change airflow direction.
•  There are 5 selections in addition 

to automatic horizontal airflow 

direction.

•  If automatic horizontal airflow 

direction has been set, the louver 

swings left and right automatically.

•  Please do not adjust the vertical and 

horizontal airflow direction louver 

manually.

Enables ion 

operation.

ION

Select fan 

speed.

FAN 

SPEED

Adjust the 

vertical or 

horizontal airflow 

direction louver.

AIR SWING

Enables oxygen 

operation.

OXYGEN

Enables powerful 

operation.

POWERFUL

Enables quiet 

operation.

QUIET

  ION indicator on the indoor unit is blinking.

  Please check if the front panel is closed properly. 

Clean the ionizer with cotton bud.

  The room has a peculiar odour.

  This may be a damp smell emitted by the wall, carpet, furniture or 

clothing in the room.

  Indoor fan stops occasionally during Automatic Fan 

Speed setting.

  This is an advanced feature that helps to remove smell from the 

surrounding area during operation.

Troubleshooting

B1_X_1EN(1-7).indd   5

5/31/2005   9:37:17 AM

Summary of Contents for CS-HE12DKE









Reviews: