Panasonic CS-E12NKUAW, Service Manual

Page: 30 / 68

30
4 REMOTE CONTROL RECEIVING SOUND OFF/ON MODE
The Remote Control Receiving Sound OFF/ON Mode will be activated if the Auto OFF/ON button is pressed
continuously for more than 16 seconds (4 “beep” sounds will occur at 16
th
seconds to identify the Remote
Control Receiving Sound OFF/ON Mode is in standby condition) and press “AC Reset” button at remote
control.
Press Auto OFF/ON button to toggle remote control receiving sound.
- Short “beep”:
Turn OFF remote control receiving sound.
- Long “beep”: Turn ON remote control receiving sound.
After Auto OFF/ON button is pressed, the 20 seconds counter for Remote Control Receiving Sound OFF/ON
Mode is restarted.
14.2 Remote Control Button
14.2.1 SET Button

To check remote control transmission code and store the transmission code to EEPROM
o
Press “Set” button continuously for 10 seconds by using pointer
o
Press “Timer Set” button unit a “beep” sound is heard as confirmation of transmission code change.
14.2.2 RESET (RC)

To clear and restore the remote control setting to factory default.
o
Press once to clear the memory
14.2.3 RESET (AC)

To restore the unit’s setting to factory default.
o
Press once to restore the unit’s setting
14.2.4 TIMER ▲

To change indoor unit indicator’s LED intensity:
o
Press continuously for 5 seconds.
14.2.5 TIMER ▼

To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F)
o
Press continuously for 10 seconds.
14.2.6 CLOCK Button

To change the remote control time format:
o
Press for more than 5 seconds