background image

4

Safety precautions

To prevent personal injury, injury to others or property 

damage, please comply with the following: 

Incorrect operation due to failure to follow instructions 

below may cause harm or damage, the seriousness of 

which is classified as below:

This appliance is filled with R32 (mild 

flammable refrigerant). If the refrigerant is 

leaked and exposed to an external ignition 

source, there is a risk of fire.

WARNING

This sign warns of death 

or serious injury.

CAUTION

This sign warns of injury 

or damage to property.

The instructions to be followed are classified by the 

following symbols:

This symbol denotes an action that 

is PROHIBITED.

These symbols denote actions 

COMPULSORY.

  

WARNING

Indoor unit and outdoor unit

This appliance is not intended for use by 

persons (including children) with reduced 

physical, sensory or mental capabilities, or lack 

of experience and knowledge, unless they have 

been given supervision or instruction concerning 

use of the appliance by a person responsible for 

their safety. Children should be supervised to 

ensure that they do not play with the appliance.

Be aware that refrigerant may not contain an 

odour, highly recommended to ensure suitable 

flammable refrigerant gas detectors are present, 

operating and able to warn of a leak.

Please consult authorised dealer or specialist to 

clean the internal parts, repair, install, remove 

and reinstall the unit. Improper installation and 

handling will cause leakage, electric shock or fire.

Confirm with authorised dealer or specialist on 

usage of any specified refrigerant type. 

Using refrigerant type other than the specified 

may cause product damage, burst and injury etc.
Do not use means to accelerate the defrosting 

process or to clean, other than those 

recommended by manufacturer. Any unfit 

method or using incompatible material may 

cause product damage, burst and serious injury.

Do not pierce or burn as the appliance is 

pressurized. Do not expose the appliance to 

heat, flame, sparks, or other sources of ignition. 

Else it may explode and cause injury or death.

Do not install the unit in a potentially explosive 

or flammable atmosphere. Failure to do so could 

result in fire.

Do not insert your fingers or other objects 

into the air conditioner indoor or outdoor 

unit, rotating parts may cause injury.

Do not touch the outdoor unit during lightning, it 

may cause electric shock.

Do not expose yourself directly to cold air for a 

long period to avoid excess cooling.

Do not sit or step on the unit, you may 

fall down accidentally.

Indoor unit

Outdoor unit

Power supply

Remote control

Air inlet

Air inlet

Air outlet

Air outlet

The appliance shall be installed, and/or operated 

in a room  and 

 flame or hazardous 

 appliances, gas cooking, 

from ignition sources,

sparks/open

gas

keep away

such as heat/

areas such as 

reticulated gas appliances, etc.

Summary of Contents for CS/CU-HU12ZKY Series

































Reviews: