CQ-RX400U/CQ-RX200U
30
CQ-RX400U/CQ-RX200U
31
Private Mode/Hands-Free Mode
Bluetooth
®
Hands-Free (continued)
(Default: Bluetooth
®
Hands-Free mode)
In the Bluetooth
®
Hands-Free mode, press
[BAND]
.
The private mode engages.
“P” is displayed.
This mode is for talking directly into the cellular phone;
the call is not played over the car speakers.
In the Private mode, press
[BAND]
.
The Bluetooth
®
Hands-Free mode engages.
“H” is displayed.
or
Example:
Incoming call number
(090-123-456)
This mode is for using the car speakers and microphone
to talk hands-free on the cellular phone. (Default)
Audio Setting
Speaker Selection Setting
(Setting range: SP LEFT, SP BOTH, SP RIGHT, default:
SP BOTH)
SP LEFT
Sound from left speaker
SP BOTH
Sound from both speakers
(Default)
SP RIGHT
Sound from right speaker
Echo Cancel Setting
(Setting range: EC LOW, EC HIGH, default: EC LOW)
EC LOW
Lower Echo Cancel Setting
(Default)
EC HIGH
Higher Echo Cancel Setting
Select if echoing disturbs the
call.
Notes:
• The volume can also be adjusted directly using
[VOL]
on the main unit. (
Operating Instructions)
• To return to the regular mode, press
[DISP]
.
• If no operation takes place for more than 5 seconds
in audio setting (2 seconds in the volume adjustment)
the display returns to the regular mode.
1
While making a call,
answering a call or talking
on the cellular phone, press
[VOL]
(
PUSH SEL:
Select)
to open the audio menu.
2
Press
[VOL]
(
PUSH SEL:
Select) to select a mode to
be adjusted.
VOL
18
Volume adjustment
SP OUT
Speaker Selection Setting
EC SET
Echo Cancel Setting
3
Turn
[VOL]
clockwise or
counterclockwise to adjust.
Volume Adjustment
(Setting range: 0 to 40, Default: 18)
: Up
: Down
Note:
With some cellular phones, the Bluetooth
®
Hands-Free mode is automatically engaged for both
outgoing and incoming calls when the cellular phone is
connected to this unit.
Troubleshooting
If You Suspect Something Wrong
Check and take steps as described below.
If the described suggestions do not solve the problem, it is
recommended to take the unit to your nearest authorized
Panasonic Servicenter. The product should be serviced only by
qualifi ed personnel. Please refer the checking and the repair to
professionals. Panasonic shall not be liable for any accidents
arising out of neglect of checking the unit or your own repair
after your checking.
Never take measures especially those other than indicated by
italic
letters in “Possible solution” described below because
those are too dangerous for users to handle themselves.
Warning
• Do not use the unit in an irregular condition, for example,
without sound, or with smoke or a foul smell, which can
cause ignition or electric shock. Immediately stop using
the unit and consult your dealer.
• Never try to repair the unit by yourself because it is
dangerous to do so.
Problem
Possible cause
Possible solution
Music is not played
back even if the USB
device is connected.
The USB device and USB extension cable are not connected correctly.
Connect the USB device and USB extension cable correctly.
There is no music stored in a format that can be played on this unit.
Check if there is any music data that can be played stored on the USB
device.
The fi le system of the USB device is not compatible with this unit.
Use a USB device with a FAT12/16/32 fi le system.
The current consumption of the USB device exceeds 500 mA.
Use a USB device with a current consumption lower than 500 mA.
“READING” is
displayed but music is
not played back.
A USB Hub is connected.
Do not use a USB Hub.
A number of recorded folders/fi les.
When there are a number of recorded folders/fi les, it may take a long time
to read all of the fi les.
USB (MP3/WMA/AAC)
Display
Possible cause
Possible solution
A USB device is not connected or the connected device cannot be recognized.
Use the type of USB memory that is suitable for this unit.
No playable fi les exist.
An unsupported USB device was connected.
Use the type of USB memory that is suitable for this unit.
Record fi les that can be played back on this unit onto the USB memory.
English
English
