Panasonic CQ-VX220W, Installation Instructions Manual

Page: 8 / 20

7
8
CQ-VX220W
English
Installation
(continued)
i
Spacer
o
Double-Faced Adhesive Tape
t
Round Head Screw
(5 mmø x 6 mm)
Bracket
Mounting Hole
of a Bracket
(in section)
Existing Bracket (L) (Bracket originally attached to the car)
o
Double-Faced
Adhesive Tape
Existing Bracket (R)
t
Round Head Screw
(5 mmø x 6 mm)
i
Spacer
❏
Installation Procedures (When not using Mounting Collar
w
)
Use the brackets supplied with your car when mounting this unit. The bracket shape and mounting method vary with car
manufacturers, car types and manufacturing year. Please consult your nearest dealer or installer.
Select mounting screws according to the hole positions and hole shape of the bracket.
y
Flat-Head Screw (5 mmø x 6 mm) 4 pieces
u
Round Head Screw (4 mmø x 3 mm)
4 pieces
t
Round Head Screw (5 mmø x 6 mm) 2 pieces
Reuse the two round head screws removed from the transportation brackets.
When using these
mounting holes
q
Push the right and left clamp plates outward, one at a time, and pull the unit toward yourself.
w
After removing the right and left clamp plates, pull the unit with both hands till it comes out.
Push here to
remove the
clamp plates.
q w
To Remove the Unit
Use the supplied Spacer
i
if mounting hole of your
car is shaped like below.
VX220W̲II̲01̲eng.qxd 09.2.24 7:21 PM ページ8