39
English
Tr
oubleshooting,
Error Display Messages
38
Error Display Messages
The file is not readable.
Error display continues when there is no playable file in the specified folder at the
direct folder selection.
a
Specify another folder.
(After 5 seconds)
To next file automatically
Display
Possible cause
a
Possible solution
CD/MP3/WMA
Disc is dirty, or is upside down.
Disc has scratches.
No operation by some cause.
a
Call the store where you purchased the unit, or your nearest Panasonic
Service Centre.
A WMA file can be copyrighted.
a
The file protected by copyright is not playable.
No disc.
Disc is dirty, or is upside down.
Disc has scratches.
(After 5 seconds)
To next disc automatically
No operation by some cause.
a
Eject the magazine. If failure persists, press the reset switch on the CD
changer. If normal operation is not restored, call the store where you pur-
chased the unit or the nearest Panasonic Service Centre to ask for repairs.
No disc (magazine).
No changer.
Note:
Messages in the action and display sections of the error chart vary with changers. Refer to the operating
instructions for the CD changer for details.
CD Changer
Problem
Possible cause
a
Possible solution
No playback or
disc ejected
The disc is inserted upside down.
a
Insert a disc correctly.
There is a flaw or foreign material on the disc.
a
Remove the foreign material, or use a flawless disc.
Sound skipping or
noise
There is a flaw or foreign material on the disc.
a
Remove the foreign material, or use a flawless disc.
Sound skipping
due to vibration
The unit is not sufficiently secured.
a
Secure the unit to the console box with the rear support strap, etc.
The unit is tilted at over 30˚ in the front-to-end direction.
a
Make the angle 30˚ or less.
Disc unejectable
Something such as a peeled label obstructs the disc coming out.
a
Hold down the [OPEN] button for 4 sec. or more when the front panel is open
(disc forced ejection). In case that the disc forced ejection does not work,
consult the dealer
The microcontroller in the unit operates abnormally due to noise or other factors.
a
Press the reset switch. If there is no reset switch, unplug the power cord and
plug it again. In case the unit is still out of order, consult the dealer.
MP3/WMA (Only for CQ-C8300N)
No playback or
disc ejected
The disc has unplayable formatted data.
a
Refer to the description about MP3/WMA for playable sound data except CD-
DA (i.e. music CD).
The unit plays back the ROM track of a MIX mode CD.
a
Skip the ROM track.
The CD-R/RWs that
are playable on
other devices are
not playable on
this unit.
The playability of some CD-R/RWs may depend on the combination of media,
recording software and recorder to be used even if these CD-R/RWs are playable on
other devices such as a PC.
a
Make CD-R/RWs in different combination of media, recording software and
recorder after referring to the description about MP3/WMA.
Sound skipping or
noise
There is a flaw or foreign material on the disc.
a
Remove the foreign material, or use a flawless disc. For MP3/WMA, refer to
the description about MP3/WMA.
CD
Troubleshooting
