ENGLISH
21
Checking GPS Satellite Reception
Press
SET UP
to open the [Setup Menu].
On the [Setup Menu], select [System Information]
by moving the joystick, and press
ENTER
.
On the [Setup Menu - Information] menu, select
[GPS], and press
ENTER
.
a
The [GPS Information] menu opens with the
following information:
• Satellite number
• Latitude and longitude of the
current position
• Current date and time
Press
POS
to return to the map display.
Important Notes:
• After the system has been installed in the vehicle, it takes about 30 min-
utes until satisfactory GPS signal reception is established.
• Check GPS reception in an open area location.
ENTER
ENTER
POS
Any operation performed while driving, other than
the
POS
button operation, will cause the mes-
sage
to be displayed.
WARNING
Press
ENTER
.
a
The warning is inhibited, and you can operate the system.
* When the display returns to the Current Position Map after the opera-
tion,
will be displayed again.
Repeat the above procedure every time you want to operate the sys-
tem while driving.
WARNING
Operating the System While Driving
When you attempt to operate the system while driving, a warning prohibiting opera-
tion is displayed. You can inhibit this message if you wish. Note though that
Panasonic cannot be responsible for any resulting accidents.
ENTER
Mode
If the monitor is switched to external input while the navigation system is in opera-
tion, the screen background color may change to black.
In this case, press
MODE
to switch the mode to NAV.
MODE
