28
Standby or Hibernation Functions
shut down and unsaved data will be lost even if you have set [Shut down] in [When I press the power button on my
computer:] (
“Setting Standby or Hibernation”).
*1
If the speakers are muted, beeps do not sound.
In standby or hibernation
Do not attach or remove a peripheral device. Doing so may cause malfunction.
Power is consumed in standby. Power consumption may increase when a PC Card is inserted. When power is
exhausted, the data retained in memory will be lost. Connect the AC adaptor when using the standby function.
To resume from standby or hibernation
1
Open the display, or slide the power switch (A).
CAUTION
Do not perform the following operations until resuming is complete. After the display is resumed, wait approximately
15 seconds (normally) or 60 seconds (when the computer is on a network).
• Touch the keyboard (except for password input), Touch Pad, or power switch.
• Use an external mouse or other peripheral device.
• Connect or disconnect the AC adaptor.
• Close or open the display.
• Shut down or restart Windows.
• Enter standby or hibernation (Wait approximately one minute).
• Operate the drive power/open switch.
• Operate the wireless switch.
• Insert and remove the SD Memory Card.
A
