94
Hard Disk Backup / Restore Function
[Backup and Restore Center] and [System Recovery Options] allow you create a backup of the entire hard disk data, which
can be used to recover from hardware failure.
NOTE
<Only for flash memory model>
z
While backing up or restoring the hard disk data, read the term “hard disk” as “flash memory” whenever it appears on
the screen.
To create a backup of the entire hard disk to another storage media (e.g., external hard disk): Use [Back up computer].
To create a backup of a file or a folder: Use [Back up files].
For further information, click
(Start) - [Control Panel] - [Back up your computer].
NOTE
z
Connect the AC adaptor and do not remove it until backup is complete.
NOTE
z
This function does not work when you turn on the computer for the first time or just after you reinstall Windows.
Start and shut down Windows 7, and then you can use the function.
z
Connect the AC adaptor and do not remove it until restoration is complete.
1
Turn on the computer, and when [Panasonic] boot screen disappears, press and hold
F8
.
z
If [Enter Password] is displayed during the following procedure, input the Supervisor Password or User Pass-
word.
2
Release your finger when [Advanced Boot Options] is displayed.
3
Press
Ï
Ð
to select [Repair Your Computer] and press
(Enter).
[System Recovery Options] appears.
4
Select the keyboard layout and click [Next].
Panasonic Corporation will bear no responsibility for any damage suffered (including loss of data) as a result of the use of
this function.
Creating a backup of the hard disk data
Restoring the hard disk data
