12
Getting Started
CAUTION
Remember this password! If the password is forgotten, Windows cannot
be operated.
3
Select settings for your region, then select [Next].
4
Enter your name and organization and then select [Next].
5
Enter your computer name and administrator password and then select [Next].
6
Enter the correct date, time and time zone, then select [Next].
It may take two to three minutes until the next screen is displayed. Wait,
and do not press any keys, or touch the touch pad, etc.
NOTE
If "Yes, make this computer a member of the following domain" is se-
lected, the following message may be displayed: [An invalid domain was
specified. Would you like to proceed for now and try joining a domain
later?]. In this case, select [Yes]. After selecting [Yes], the computer will
restart automatically, but sometimes the [Starting Windows] message will
remain on the screen, and windows will not start up. If this happens, hold
Tab
down while pressing
Alt
until [Network Identification Wizard]
is displayed on top, and follow the instructions on the screen.
9
Enter your administrator password and select
.
NOTE
7
At [Networking Settings], select [Typical settings], then select [Next].
8
At [Workgroup or Computer Domain], select [No, this computer is not on a
network, or is on a network without a domain], then select [Next].
The computer will restart.
First-time Operation
6
Enter the correct date, time and time zone, then select [Next].
7
At [Networking Settings], select [Typical settings], then select [Next].
8
At [Workgroup or Computer Domain], select [No, this computer is not on a net-
work, or is on a network without a domain], then select [Next].
The computer will restart.
9
At [Welcome to the Network Identification Wizard], select [Next].
CAUTION
3
Select settings for your region, then select [Next].
4
Enter your name and organization and then select [Next].
5
Enter your computer name and administrator password and then select [Next].
CAUTION
Windows 2000
1
At the [Welcome to the Windows 2000 Setup Wizard], select [Next].
2
After reading the agreement, select [I accept this agreement] or [I don’t accept this
agreement], then select [Next].
NOTE
Do not press any key or move the touch pad until [Windows 2000 Professional
Setup] is displayed.
Remember this password! If the password is forgotten, Windows cannot
be operated.
If [I don’t accept this agreement] is selected, the Windows setup will be
aborted.
Summary of Contents for CF-73JCLTXKM - Toughbook 73 - Pentium M 1.6...
Page 42: ...42 Appendix Memo ...
Page 43: ...43 Appendix ...