![background image](http://html.mh-extra.com/html/panasonic/cf-27-series/cf-27-series_reference-manual_264222014.webp)
14
Suspend/Hibernation Functions
Save all data before powering off your computer.
When restarting from or shutting down to the suspend or hibernation mode, do not
touch the touch pad or touchscreen (or move the mouse (serial or PS/2 type) if one is
connected). These devices may fail to operate, you will then need to restart your
computer.
Do not shut down by using the suspend or hibernation function during the following
periods (you may corrupt your data or file):
• While the MP indicator (
) or HDD indicator (
) is on.
• While playing/recording audio files.
• While communications software is being used.
Do not use the suspend or hibernation function when using an operating system
other than the one provided with your computer, the Setup Utility, or when experienc-
ing static electricity or noise.
If you hold down on the
Alt
,
Ctrl
or
Shift
key to enter the suspend or hibernation
mode, after resuming operation, you must press the same key. For example, if you hold
down on the key while pushing the power switch, upon resuming, if you do not
press the key again, only capital letters will result from typing.
Only when the computer stops operating or locks up should the power switch be held
more than four seconds to power off the computer. Slide the power switch to power
on and data not previously saved will be lost.
In the suspend mode, power is consumed. If PC Cards (e.g., a modem card) are
inserted, more of that power may be consumed. When all power has been con-
sumed, all data saved in suspend is lost since it is retained in memory. We therefore
recommend plugging in the AC adapter when using the suspend function.
Repeatedly using the suspend or hibernation function will use up a lot of the system
resources and the computer may not work properly. Shut down Windows ([Start]-
[Shut Down]) on a regular basis, i.e. approximately once a week, without using the
suspend or hibernation function. Doing so will restore the system resources.
Do not use the suspend or hibernation function during the following periods. The
suspend or hibernation function, or peripherals may not work.
• When a file in external devices such as a CD-ROM drive, external hard disk, or ATA
card is opened, the suspend or hibernation function may not work. In such cases,
close the file.
• LAN cards, SCSI cards and modem cards may not recover after entering the sus-
pend or hibernation mode. If this occurs, restart the computer.
Do not use the suspend or hibernation function when using in a network environment.
Windows 95
When inserting a CardBus type card with one already inserted, after entering the
suspend or hibernation mode, the computer may not function properly.
After a Windows 95 USB device driver has been installed, do not use the suspend or
hibernation function. If the suspend or hibernation mode is activated, the computer
may not function properly. Power off, then on, using the power switch to resume
proper operation.
If you want to use the suspend or hibernation function after the USB driver is installed,
disable the USB device function of the computer by following the procedure below.
1
In [Start] - [Settings] - [Control Panel] - [System] - [Device Manager], select [Intel
82371AB/EB PCI to USB Universal Host Controller] in [Universal serial bus con-
troller].
2
Add the check mark
for [Disable in this hardware profile] in [Properties] - [Gen-
eral], press [OK], and then press [Close].
3
In [Start] - [Shut Down], select [Restart], then press [OK].
If you want to enable the USB device function again, delete the check mark for [Dis-
able in this hardware profile] in step
2
. When the message appears asking whether
to reboot the computer, select [Yes]. If the message is not displayed, go to step
3
.
Precautions for Using the Suspend or Hibernation Function
Shift
Shift
(To next page)