![background image](http://html.mh-extra.com/html/panasonic/cf-27-series/cf-27-series_reference-manual_264222037.webp)
37
1
Connect the external display
Do not shut down using the suspend or hibernation mode.
Power off your computer
(
"Starting Up/Shutting Down")
Run the Setup Utility
(
page 44
)
Using and , select [Main]
Turn on the external display, then turn on your computer
with the display opened and make settings during start-up
3
1
2
3
Using an External Display
Select your external display
4
Set your external display for [Monitor] in [Start] - [Settings] - [Control
Panel] - [Display] - [Settings] - [Advanced Properties].
When a monitor that does not conform to the Plug & Play standards
is connected, select [Change] and make the monitor settings.
You can select either an external display, LCD or simultaneous with
Fn
+
F3
. In addition, you can set the display to use during start-up with the
following procedure.
For more detailed information, refer to the operation manual of the
port replicator, the external display port adapter or the external dis-
play.
2
NOTE
Using and , select the display to use and press
Enter
Press F10 , then select [Yes]
Using and , select [Display] and press Enter
The optional port replicator (
page 35
) or the external display port
adapter (CF-VEB274) is required for use with an external display.
Windows 95
5
6