![background image](http://html.mh-extra.com/html/panasonic/cf-27-series/cf-27-series_reference-manual_264222059.webp)
59
Dealing With Problems
Try changing the mute by pressing
Fn
+
F4
.
Has the Setup Utility been used to set [Speaker] to [Disable]?(
page 45
)
Has the Setup Utility been used to set [Sound Controller] to [Disable]?
(
page 47
)
The sound is not heard
The volume can not be
changed by pressing
Fn
+
F5
or
Fn
+
F6
Sound
Unusual Sound
The computer produces
a strange sound
If the computer enters the ECO mode or the LCD is closed while the computer is
making a sound, the computer may produce a strange sound, but this does not
indicate a problem.
If the computer has not been used for a long period of time, it may produce an
unusual sound at start up. The sound may continue for a short period of time,
but if the computer starts up in a normal manner, then the problem is not serious.
If, however, the computer fails to start up, contact Panasonic Technical Support.
Network
When using the computer as a network computer, additional settings may need
to be set depending on the usage conditions. Ask your system administrator or
the person in charge of the network.
The computer must be restarted if suspend or hibernation mode is entered.
Unable to connect to a
network
Your peripheral does not
work (An error occurs
while installing the driver)
Unable to print
The cursor does not
move from mouse opera-
tions
Windows 95
You need to use drivers conforming to Windows 95 Version 4.00.950B (OSR-2.1).
Some earlier drivers will no longer work.
For more information, please ask the manufacturer of the driver in question.
Windows NT
You need to use drivers compatible with the operating system.
Some earlier drivers will no longer work.
For more information, ask the manufacturer of the driver in question.
Press
F9
in the Setup Utility.
Check the computer-printer connection.
Make sure the printer is on.
Make sure the printer is in the online state.
Make sure paper is in the printer tray and there is no paper jam.
Has the Setup Utility been used to set [Parallel Port] to [Enable]?
Check your mouse connection, then reboot the computer from the keyboard.
From the keyboard, you may choose to press down on
, then select [Shut
Down].
Connecting Peripherals
Press
Ctrl
+
Alt
+
Del
to reboot the computer.
After cutting the power by pressing the power switch for more than four seconds,
slide the power switch to power on and open the application again.
If the program no longer works normally, go to [Start] - [Settings] - [Control Panel]
- [Add/Remove Programs] to delete the program. Then try installing the program
once again.
Computer hangs
Application Software