Panasonic CF-19 series, Getting Started Manual

Page: 20 / 21

SDD - Getting Started Guide
19
VCI Updates
The VCI Devices require the user to manually update them.
Further information can be viewed in the Special Service Message (SSM):
SSM 71382 - SPX i-View (Land Rover)
SSM 71383 - SPX i-View (Jaguar)
SSM 71360 - DA-Dongle & DA-VINA (Land Rover)
SSM 71361 - DA-Dongle & DA-VINA (Jaguar)
SSM 71384 - MongoosePro JLR (Land Rover)
SSM 71399 - MongoosePro JLR (Jaguar)
These documents can be found in TOPIx, under the ‘Bulletins’ tab, ‘Special Service Messages’
and the ‘Diagnostic Software/Hardware’ option on the left side of the screen.
VCM Updates
When an update is available for the VCM, SDD will automatically prompt the user via a pop up
that an update is required. The user can then update the VCM by completing the on screen
prompts.
Your Machine is Now Ready for Use
After completing all of the required processes in ‘ SDD Initial Set up ’ and ‘ Vehicle
Communication Interface (VCI) Devices ’ the SDD machine is now setup and ready for use.
Regular maintenance is required to the SDD machine to update the SDD DVD software and VDF,
to make sure it is operating at the correct level to work on all the latest vehicles.
To assist in the SDD Maintenance, go to: ‘ SDD Regular Maintenance ’.