15
How to Use the On Screen Menu
The screen displays eight types of information: input signal status, picture/volume adjusting menu status,
sharpness display, FUNCTION display, audio level meter display, menu display, TIME CODE display and CLOSED
CAPTION display.
1. Main window
, sub-window
indication
•
Indicates whether the main window or sub-window
is displayed.
•
In split screen display, the screen synchronized to
the reference sync changes with the input signal
format and “TWO WINDOW SIZE” settings ( page
44).
The screen synchronized to the reference sync is
displayed in white and the screen that is not
synchronized is displayed in yellow.
2. The selected input line (
page 11,
)
•
VIDEO, SDI1, SDI2,
YP
B
P
R
/RGB-VIDEO/RGB-COMP.
DVI-VIDEO/DVI-COMP.
•
Use “STATUS DISPLAY” in the “SYSTEM CONFIG”
menu to set the display status ( page 29).
3. Various indications (FILM mode)
•
This indicates that “GAMMA SELECT” is set to
“FILM” in the “VIDEO CONFIG” menu.
4. Signal format
•
Use “STATUS DISPLAY” in the “SYSTEM CONFIG”
menu to set the display status ( page 29).
•
“UNSUPPORT SIGNAL” appears if an unsupported
signal is input. It may also indicate that the format
selected in the “INPUT SELECT” menu does not
match the input signal.
•
“NO SIGNAL” appears if no signal is input.
Note:
“UNSUPPORT SIGNAL” and “NO SIGNAL” may not
be properly displayed.
5. Various indications (Lock status)
•
This indicates that “CONTROL” is set to “REMOTE”
in the “CONTROL” menu.
•
Press the ADJUST button ( page 11,
) to open
the picture/volume adjusting menu.
•
To clear the display, press the ADJUST button again,
press the MENU button or leave it idle for 10
seconds.
•
Only adjustments that appear on the screen can be
adjusted.
•
The display always appears in the same screen
location.
•
This is the SHARPNESS H/V mode display.
•
It disappears after 2 minutes of inaction.
Input signal status
7
Picture/volume adjusting menu
9
Sharpness display
