40
Main Menu
(continued)
■
“WFM/VECTOR”
The “WFM/VECTOR” function enables display of the waveform and vector display. Use “DISPLAY SETUP” in the
main menu to select “WFM” and “VECTOR” display. (
page 39)
Press the button ([FUNCTION1] to [FUNCTION5] (
page 32)) to which the “WFM/VECTOR” function has been
assigned to turn the function on and off. (This assumes that the “WFM/VECTOR” function has been assigned to
any of the [FUNCTION1] to [FUNCTION5] buttons.)
These examples show 16:9 aspect ratio images.
*1 Displayed only for SDI signal input.
Normal screen
WFM display
VECTOR display
*1
WFM (waveform display)
VECTOR
(vector display)
Press the FUNCTION button to which the WFM/VECTOR function has been assigned.
Press the
button again
Press the
button again
