manualshive.com logo in svg

Panasonic BT-H1700P, Service Manual

The Panasonic BT-H1700P is a high-quality professional monitor. Enhance your viewing experience with its exceptional display quality and user-friendly controls. Unlock the full potential of this product by easily accessing its Service Manual, available for free download on our website. Experience excellence with the Panasonic BT-H1700P.

Share
Download
background image

 67

NTSC/PAL HIGH-LIGHT/LOW-LIGHT WHITE BALANCE ADJUSTMENTS

Measuring Instruments

Signal generator (10-step gray scale signal)

Color temperature meter

Card (Slot)

NTSC/PAL Video Input Card (Slot 2)

Test Points

Adjustment Points

W*01 (Drive (R)), W*03 (Drive (B)), W*04 (Cut Off (R)),

W*05 (Cut Off (G)), W*06 (Cut Off (B)) [Service Menu]

Notes: • Perform the following adjustments after completing the 1080/60i White Balance (High-Light, Low-Light) Adjustments.

• Set the COLOR TEM./BAL. data in the Setup Menu to “00”.
• The values adjusted with WO (see the description of the High-Light White Balance adjustment) become the reference values for

the high-light white balance adjustment. When this data is changed, it is required to re-adjust the high-light white balance data
of all of the adjustment signals (Component, NTSC and PAL).

• The values adjusted with WP (see the description of the Low-Light White Balance adjustment) become the reference values for

the low-light white balance adjustment. When this data is changed, it is required to re-adjust the low-light white balance data of
all of the adjustment signals (Component, NTSC and PAL).

<HIGH: D9300>

1. Apply the NTSC 10-step gray scale signal to INPUT C (Terminal VIDEO1 of the NTSC/PAL Video Input Card).
2. Set COLOR TEMP. of “COLOR TEMP./BAL.” in the Setup Menu to HIGH.
3. Set the PHASE, CHROMA, BRIGHT and CONTRAST potentiometers on the front panel to the center click positions.
4. Adjust WA01 and WA03 in the Service Menu using the color temperature meter so that the color temperature is set as shown below.

(Do not touch WA02.)

Color temperature : HIGH (D9300).   x = 0.283, y = 0.297 (Reference value)

5. Ensure that the white balance tracking is correct from the gray scale steps with lower color temperatures to those with higher color temperatures.

If the white balance tracking is deviated in darker steps, adjust WA04 to WA06 (Low-Light) to correct it.
(Do not set the values of WA04 to WA06 no more than “50”.)

<LOW: D65>

6. Set COLOR TEMP. of “COLOR TEMP./BAL.” in the Setup Menu to LOW.
7. Adjust WB01 and WB03 in the Service Menu using the color temperature meter so that the color temperature is set as shown below.

(Do not touch WB02.)

Color temperature : LOW (D65).   x = 0.313, y = 0.329 (Reference value)

8. Ensure that the white balance tracking is correct from the gray scale steps with lower color temperatures to those with higher color temperatures.

If the white balance tracking is deviated in darker steps, adjust WB04 to WB06 (Low-Light) to correct it.
(Do not set the values of WB04 to WB06 no more than “50”.)

9. Vary the adjustment signal and adjustment data, and re-perform adjustments in steps 1 to 8 above (see Table 20).

Table 20

Adjustment Signal

Function

Adjustment Data

R

G

B

NTSC (Common to VIDEO and Y/C)

Drive

WA01

—

WA03

[HIGH : D9300]

Cut off

WA04

WA05

WA06

NTSC (Common to VIDEO and Y/C)

Drive

WB01

—

WB03

[LOW : D65]

Cut off

WB04

WB05

WB06

PAL (Common to VIDEO and Y/C)

Drive

WC01

—

WC03

[HIGH : D9300]

Cut off

WC04

WC05

WC06

PAL (Common to VIDEO and Y/C)

Drive

WD01

—

WD03

[LOW : D65]

Cut off

WD04

WD05

WD06

Summary of Contents for BT-H1700P


























































































































Reviews:

No comments

Related manuals for BT-H1700P

Samsung LD190N - LCD Monitor 1360X768 5MS Analog Manual Del Usuario preview
LD190N - LCD Monitor 1360X768 5MS Analog
Brand: Samsung Pages: 47
Samsung 971P - SyncMaster - 19" LCD Monitor Owner'S Manual preview
971P - SyncMaster - 19" LCD Monitor
Brand: Samsung Pages: 56
JETWAY 194 Series User'S Manual Operation And Maintenance Instructions preview
194 Series
Brand: JETWAY Pages: 20
Jetter JVM-507B - HMI User Manual preview
JVM-507B - HMI
Brand: Jetter Pages: 152
Panasonic TYSP50P8WK - Speakers For 50IN Plasma... Product Specifications preview
TYSP50P8WK - Speakers For 50IN Plasma...
Brand: Panasonic Pages: 1
Panasonic CT-27HL15 Operating Instructions Manual preview
CT-27HL15
Brand: Panasonic Pages: 56
Daktronics Galaxy AE-3010 Manual preview
Galaxy AE-3010
Brand: Daktronics Pages: 79
GERATHERM GT-868UF Instruction Manual preview
GT-868UF
Brand: GERATHERM Pages: 21
Princeton SENergy 914 Reference Manual preview
SENergy 914
Brand: Princeton Pages: 22
Hartig+Helling MBF 1213 Operating Instructions Manual preview
MBF 1213
Brand: Hartig+Helling Pages: 22
NEC MultiSync FP912SB User Manual preview
MultiSync FP912SB
Brand: NEC Pages: 44
ADTECHNO UH1560S User Manual preview
UH1560S
Brand: ADTECHNO Pages: 69
Azbil CMG Series User Manual preview
CMG Series
Brand: Azbil Pages: 34
Dynascan DO552LR4 User Manual preview
DO552LR4
Brand: Dynascan Pages: 28
switel BCF 809 Operating Manual preview
BCF 809
Brand: switel Pages: 1
Blitz M35H Owner'S Manual preview
M35H
Brand: Blitz Pages: 16
A&A Tech EEM MOT 01 FE03.02 Operator And Maintenance Manual preview
EEM MOT 01 FE03.02
Brand: A&A Tech Pages: 16
I-Tech iOP-W1900 User Manual preview
iOP-W1900
Brand: I-Tech Pages: 31

Brands by name

Popular brands

Load more brands