![background image](http://html2.mh-extra.com/html/panasonic/bl-c111a-network-camera-pan/bl-c111a-network-camera-pan_operating-instructions-manual_3609852097.webp)
5.5 Changing Basic Camera Settings
The [Camera] page of the [Setup] tab allows you to adjust basic camera features.
1.
Click the [Setup] tab.
2.
On the left side of the screen under [Basic], click [Camera].
3.
Under [AC Power Source Frequency], select the desired setting.
–
[Auto]: The power source frequency is selected automatically.
–
[50 Hz]: Select this item if your AC power source operates at 50 Hz.
–
[60 Hz]: Select this item if your AC power source operates at 60 Hz.
Note
•
[60 Hz] is the default setting. This setting should not need to be changed.
4.
Under [Return to Specified Position], select whether you want the camera to move the lens to a specific
preset position after a specified period of inactivity.
a.
Select the length of time (inactivity) that passes before the camera moves the lens. If this setting is too
short, you may have difficulty registering presets because the lens will return to the specified position
before you have saved your new preset.
b.
Select the desired preset position (see Page 22).
5.
Under [Color Night View], select whether the camera’s color night view mode feature is automatically
activated when the camera image is dark.
•
When this feature is activated, the camera image becomes brighter when the camera image is dark
(e.g., when the lights in a room are turned off), and deactivates when the image becomes bright again.
•
This feature is enabled by default.
•
When this feature is activated, refresh rate decreases and images become blurry when the object or
the lens is moving.
•
When this feature is activated, white or colored dots or horizontal lines may be displayed in the camera
image. This is a characteristic of the camera’s optical sensor, and is not a malfunction.
6.
Click [Save].
Operating Instructions
97
5.5 Changing Basic Camera Settings