![background image](http://html2.mh-extra.com/html/panasonic/bl-c111a-network-camera-pan/bl-c111a-network-camera-pan_operating-instructions-manual_3609852076.webp)
•
When [Setup completed] is displayed, the addresses for accessing the camera over the LAN and over
the Internet are displayed.
5.
Click [To Single Camera page].
Configuring the camera to use Viewnetcam.com from the [UPnP] page
1.
Click the [Setup] tab.
2.
On the left side of the screen under [Basic], click [DynamicDNS].
3.
Select [Viewnetcam.com], then click [Next].
4.
Click [Save].
•
When setup is complete, [Success!] is displayed.
5.
Click [Go to Viewnetcam.com page].
6.
Click [Your Account Link].
7.
The Viewnetcam.com website is displayed. Follow the on-screen instructions to register with
Viewnetcam.com.
•
If the Viewnetcam.com website is not displayed, confirm that your PC can access the Internet, then
click your web browser’s refresh button.
•
When registration is complete, you can access the camera using the Viewnetcam.com URL you
selected during registration. Note that you can access the camera using this URL only from a PC that
is not connected to the same network (LAN) as the camera.
76
Operating Instructions
4.2.1 Configuring the Camera to Use Viewnetcam.com