Panasonic AWPS505 - AC ADAPTOR, Operating Instructions Manual

Page: 6 / 92

6
? ABC button
This is used to automatically adjust camera’s black
balance in the pan-tilt head system currently selected.
Set the IRIS [AUTO/MANU/LOCK] button to AUTO (the
IRIS button is now lighted), and press the ABC button.
While the black balance is being adjusted, the ABC
button’s lamp flashes; when it has been adjusted
properly, it goes off. It comes on when it was not possible
to perform the adjustment.
<Note>
If a pan-tilt head other than the AW-PH350 is being used,
the ABC button’s lamp also goes off if the black balance
was not adjusted properly.
@ LCD panel
This displays the statuses of the current settings.
A CAMERA CONTROL lamp
This comes on when communication with the camera in
the currently selected pan-tilt head system has been
established properly. It goes off when there is a problem
with the communication.
<Note>
If a pan-tilt head other than the AW-PH350 is being used,
the lamp will remain off even if communication has been
established properly.
B Menu setting control (L)
This is used to change the item or the value of the item
displayed on the left at the bottom of the LCD panel in the
setting menu mode.
C Menu setting control (R)
This is used to change the item or the value of the item
displayed on the right at the bottom of the LCD panel in
the setting menu mode.
D Menu setting control (main)
This is used to select the item or change the value of the
item displayed at the top of the LCD panel in the setting
menu mode.
E R/B GAIN/PED button
Press this button to adjust the camera’s R/B gain or R/B
pedestal in the pan-tilt head system currently selected.
Each time it is pressed, the adjustment mode is set to ON
or OFF in turn.
When the adjustment mode is set to ON, the button’s
lamp comes on; when it is OFF, the lamp goes off.
F MENU button
This is used to select ON or OFF for the setting menu
mode of the pan-tilt head system currently selected.
Each time it is pressed, the menu mode is set to ON or
OFF in turn.
When the setting menu mode is set to ON, the button’s
lamp comes on, and the setting menu appears on the
LCD panel. In this status, the MENU button is used to
select the setting menu items as well.
When the setting menu mode is set to OFF, the button’s
lamp goes off, and the LCD panel returns to its original
display.
G LCD CONTRAST control
This is used to adjust the contrast of the LCD panel.
H OK button
This is pressed to select setting menu items or to enter
the values of items.
Parts and their functions
$ Control panel
CONTROL/PREVIEW MONITOR OUT SEL
AUX 1 2 3 4 5
TALLY
TRACING MEMORY
LAMP
MENU
LIMIT
OFF
LIMIT
ON
FULL EMPTY
OK
LCD
CONTRAST
CAMERA
CONTROL
START
POINT
R/B
GAIN/PED
WHITE
BAL
AWC
GAIN
MODE
CLOSE WIDE NEAR
DATA SET
TR/PSET M.LOCK
MEMORY
IRIS
IRIS
IRIS
OPEN
ZOOM
TELE
FOCUS
FAR
CALL
INCOM
LEVEL
FOCUS
OPEN
FAR
TELE
OFF
ON
OPERATE
WIDE
ZOOM/FOCUS/IRIS
ABC
ATW
A
B
NG
OK
START/STOP RESTORE RESET
DEF WIP H/F EXT ND OPTION
PAN/TILT SET CAMERA CONTROL
TRACING/PRESET MEMORY
IRIS
SPEED
PRIORITY
FOCUS
BAR
CAM
TR
PSET
LOW
HIGH
AUTO
MANU
AUTO
MANU
LOCK
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 130
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
DOWN
PA N / T I LT / F O C U S / I R I S
U P
L R
CLOSE
NEAR
OPEN
FAR CLOSE
NEAR
? @ D
F H
G E A C B
It is possible to switch the speed at which the setting value
of some of the items in the setting menu changes each
time jog dial
B
,
C
or
D
is pressed.
(See pages 36 and 37)
Note that this function may not work with the AW-RP615
Control Panel (optional accessory).