Panasonic AWPS505 - AC ADAPTOR, Operating Instructions Manual

Page: 35 / 92

35
Operation
$ Preset memory settings
The multi-function controller is equipped with a preset
memory function for entering the positions and settings with
which the pan-tilt head system is to shoot.
Preset memory data is entered into TRACING/PRESET
MEMORY buttons 1 through 50.
1. Select the pan-tilt head system using the
CONTROL/PREVIEW MONITOR OUT SEL button.
2. Connect a color monitor to the VIDEO/Y OUT connector
on the main unit that corresponds to the pan-tilt head
system currently selected.
3. Use the following buttons to establish the modes.
O
Press the IRIS button to establish the MANU mode
(the IRIS button’s lamp now goes off).
If the AUTO mode is established, the lens iris position
will not be entered.
O
Press the TR/PSET button to establish the preset
memory mode (the TR/PSET button’s lamp now goes
off).
O
If the M.LOCK button’s lamp lights, press the
M.LOCK button to establish the memory entry mode
(the M.LOCK button’s lamp now goes off).
4. Operate the ZOOM lever and PAN/TILT lever, and on
the monitor check the pictures which are to be shot.
5. Select the white balance from among the A, B and ATW
buttons, and adjust the lens iris using the FOCUS/IRIS
dial.
6. Set the unit to a state in which the MEMORY button is
held down.
When the MEMORY button is pressed, those buttons
among the TRACING/PRESET MEMORY buttons 1
through 50 in which data can be entered start flashing in
sequence.
<Note>
If a button has a lamp that remains off, it means that
data has already been entered into it. Preset memory
data cannot be entered into it.
7. While the MEMORY button is held down, press the
button in which the preset memory data is to be entered.
8. If necessary, enter other shooting positions and settings
into other buttons among TRACING/PRESET MEMORY
buttons 1 through 50 as preset memory data.
9. Select the next pan-tilt head system using the
CONTROL/PREVIEW MONITOR OUT SEL button, and
continue setting the preset memory data for each system
concerned.
Entering preset memory data
CONTROL/PREVIEW MONITOR OUT SEL
AUX 1 2 3 4 5
TALLY
TRACING MEMORY
LAMP
MENU
LIMIT
OFF
LIMIT
ON
FULL EMPTY
OK
LCD
CONTRAST
CAMERA
CONTROL
START
POINT
R/B
GAIN/PED
WHITE
BAL
AWC
GAIN
MODE
CLOSE WIDE NEAR
DATA SET
TR/PSET M.LOCK
MEMORY
IRIS
IRIS
IRIS
OPEN
ZOOM
TELE
FOCUS
FAR
CALL
INCOM
LEVEL
FOCUS
OPEN
FAR
TELE
OFF
ON
OPERATE
WIDE
ZOOM/FOCUS/IRIS
ABC
ATW
A
B
NG
OK
START/STOP RESTORE RESET
DEF WIP H/F EXT ND OPTION
PAN/TILT SET
CAMERA CONTROL
TRACING/PRESET MEMORY
IRIS
SPEED
PRIORITY
FOCUS
BAR
CAM
TR
PSET
LOW
HIGH
AUTO
MANU
AUTO
MANU
LOCK
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 130
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
DOWN
PA N / T I LT / F O C U S / I R I S
U P
L R
CLOSE
NEAR
OPEN
FAR CLOSE
NEAR
3 5 4 4
(5)
3 3 1
5
6•7