- 5 -
O
Do not install the pan/tilt head on any of its sides.
O
Avoid using the pan/tilt head in kitchens or other places where there is excessive steam
and oil fumes.
O
Make sure that the installation of the pan/tilt head has been completed before mounting
the camera onto it.
O
This pan/tilt head has a maximum load capacity of 8.8 lb (4 kg).
Do not use it for loads over 8.8 lb (4 kg).
O
Do not use a lens that will cause the camera to be poorly balanced. Such a lens should
not be used even if the load capacity is under 8.8 lb (4 kg).
O
Do not install the pan/tilt head outdoors or in any place where the temperature is over
113°F (45°C) or below 14°F (–10°C).
Further, it should be used where the ambient humidity is less than 90%.
O
Screws for mounting the pan/tilt head are not provided with the stand and must therefore
be purchased separately.
They should be selected with due consideration given to the location where the pan/tilt
head is to be mounted and its load capacity.
O
To supply power to the pan/tilt head, use only the AC adapter (AW-PS300A) designed
for use with this pan/tilt head. The pan/tilt head cannot be powered by batteries or any
other source of power.
O
When handling the pan/tilt head, be sure to hold it by the base.
Do not lift the pan/tilt head by the head or tilting arm.
Doing so may cause the unit to malfunction.
O
Do not turn the head or tilting arm by hand.
Doing so may cause the unit to malfunction.
O
Dropping the pan/tilt head or subjecting it to a strong shock may cause malfunctioning or
an accident.
O
Install the pan/tilt head so that a clearance of at least 3.3 ft. (1 m) is left around the
monitor.
O
When mounting a camera onto the pan/tilt head, take due care to prevent the camera
from slipping out of position or dropping.
O
Install the pan/tilt head and set the limiters so as to ensure that none of the components
mounted on the pan/tilt head or cables will make contact with any other objects in the
vicinity when the pan/tilt head rotates.
Installation precautions
