Panasonic AW-UN70KE Operating Instructions Manual Download

Page: 89 / 144

Web screen configurations

(continued)

IR ID

Configure the unit’s remote control ID.
The settings for this item correspond to the [CAM1] to
[CAM4] buttons on the wireless remote control.

Setting value:

CAM1, CAM2, CAM3, CAM4

Factory settings:

CAM1

CAM/BAR

Switch between color bar display and camera image
display on the monitor and the web setup screen.

Setting value:

Camera, Colorbar

Factory settings:

Camera

●

When the color bar is displayed, a test tone (1 kHz)
is output according to the Audio setting in the
camera menu.

Note

Bars Type

Change the type of color bar to display. (page 50)

Setting value:

Type1, Type2

Factory settings:

Type2

Bars Title

Set camera title (page 68) display to Off/On for when
the color bar is displayed.

Factory settings:

Off

●

The camera title is not displayed when the camera’s
OSD menu is displayed in the Web screen.

Note

OSD Mix

This item’s setting is reflected when the [Set] button is
pressed.

OSD Off With Tally

This is used to enable or disable the function for clearing
the OSD menu displays when the tally signal is received
by a command or contact.
When the tally signal is released, the original OSD menu
displays are restored.

Factory settings:

Off

OSD Status

“Off” or “On” is set here for the status display which
appears during AWB operations.

Factory settings:

Off

Protocol

This item’s setting is reflected when the [Set] button is
pressed.

Model Select

Set the protocol model for standard serial communication.
Do not select “Reserved1” to “Reserved7”.

Setting value:

SEVIHD1, SBRC300, SBRCZ330,
Reserved1 to 7

Factory settings:

SEVIHD1

Summary of Contents for AW-UN70KE

















































































































































Search results

Summary of Contents for AW-UN70KE

Reviews:

Related manuals for AW-UN70KE

Brands by name

Popular brands

Panasonic AW-UN70KE, Operating Instructions Manual

Search results

Summary of Contents for AW-UN70KE

Reviews:

Related manuals for AW-UN70KE

Brands by name

Popular brands