Panasonic AW-UN70KE, Operating Instructions Manual

Page: 29 / 144

29
Basic operations
(continued)
■
Operations on the AW‑RP120 Remote Camera Controller
For operating the camera menus.
CAMERA OSD:
When this is pressed for about
2 seconds, the selected camera
menu is displayed, overlapping the
camera output image. When it is
pressed for about 2 seconds while
a camera menu is displayed, the
menu is exited.
F1:
Turn F1 to move the cursor up and
down in the camera menu or to
change setting values. Press F1 to
move to the next level of a menu
item or to change a setting value
at the lowest level.
For selecting the cameras to be operated.
●
Camera menu operation
1
Press the appropriate [CAMERA SELECT/
GROUP SELECT] button ([1] to [10]) to select
the unit you want to operate.
2
Press and hold the [CAMERA OSD] button on
the AW‑RP120 for about 2 seconds.
The AW-UN70 camera menu appears on the monitor.
3
Turn the F1 dial to select an AW‑UN70 camera
menu item or to change a setting value.
Turn the F1 dial to move the cursor up and down or to
change setting values.
Press the F1 dial to move to the next level of a menu
item or to change a setting value at the lowest level.
4
To exit the camera menu, press and hold the
[CAMERA OSD] button for about 2 seconds.
●
Switching between Day and Night mode
1
Press the [MENU] button on the AW‑RP120.
The [MENU] button lights.
2
Press the FUNCTION menu [23] button.
The button lights, and the OPTION menu appears on the
LCD panel.
3
Turn the F1 dial to select “FUNCTION”, then
press the F1 dial.
4
Turn the F1 dial to select “OPTION”.
“Off” or “On” appears on the bottom right (F2 area) of the
LCD panel.
5
Turn the F2 dial to select “Off” or “On”, then
press the F2 dial.
Off: Day mode
On: Night mode
●
Auto mode cannot be specified with this operation.