manualshive.com logo in svg

Panasonic AW-HS50N, Operating Instructions Manual, Page: 90 / 125

Share
Download
Panasonic AW-HS50N Operating Instructions Manual Download Page 90

90

Word

Explanation

Tally

The signal which outputs the program output statuses of the input signals to an 
external device. The LED that indicates the program output status on the control 
panel is also referred to as tally.

Transition

A function that switches from one image to another.
Wipe, mix and other effects are available for the images during switching.

Tri-level Sync

The sync signal used for HD formats.

Trimming

This is the function that eliminates the unnecessary parts at the top, bottom, left and/
or right of the images which are combined using the PinP function.

Up Converter

This is the function that converts material in the SD format into the HD format which 
yields a high resolution.

Wipe

A video effect in which one image is gradually replaced by another as the boundary 
between the two is moved using a preselected pattern.

Appendix (glossary)

Summary of Contents for AW-HS50N






























































































































Reviews:

No comments