manualshive.com logo in svg

Panasonic AW-HS50N, Operating Instructions Manual, Page: 107 / 125

Share
Download
Panasonic AW-HS50N Operating Instructions Manual Download Page 107

16

1. Parts and their functions

1-2.  Rear panel

TALLY / GPI

DVI OUT

DVI IN

LAN

SDI IN

SDI OUT

SIGNAL GND

BOOT

POWER

12 V

ON

1

1

2

4

3

2

3

4

1

2

IN

SV NM

$

"

 

#

!

 POWER switch [POWER]

When the POWER switch is set to the ON position, 
the POWER indicator (

) lights, and the unit can 

be operated.

 SDI OUT connectors [SDI OUT 1, 2]

These are the HD/SD SDI signal output connectors.
The following signals can be assigned to the 
connector by menu operations:

PGM, PVW, CLN, AUX, MV, KEYOUT

 

At the SDI OUT 1 connector, the output signals 
are split into two and output through two 
connectors. 
It is the same signal that is output.

 

The OSD menu, multi view display frame, tally 
information, names of the materials and audio 
level meters are not displayed for the signals of 
the SDI OUT 1 connector.

 

When the high-resolution multi view mode is 
enabled, it is not possible to assign MV signals.

 SDI IN connectors [SDI IN 1 to 4]

These are the HD/SD SDI signal input connectors.
The following input modes can be set by menu 
operations:
 

SDI IN 1, 2:

 Normal, DbyD

 

SDI IN 3, 4:

 Normal, DbyD, UC, Auto

The video process function can be used for all the 
SDI IN 1 to 4 input signals.

 

The up-converter cannot be used for SDI IN 1 
and 2.

 

When signals differing from the system format 
have been input, they are replaced with black 
signals.
(However, when HD has been selected as the 
system format setting and DbyD or UC has been 
selected as the input mode setting, SD signals 
with the same vertical frequency can be input.)

 DVI IN connector [DVI IN]

This is the DVI-D signal input connector. 
Signals with the following resolution can be input to 
this connector.

Digital RGB (vertical frequency: 60 Hz):

XGA (1024 

 768), WXGA (1280 

 768), 

SXGA (1280 

 1024), WSXGA+ (1680 

 1050), 

UXGA (1600 

 1200), WUXGA (1920 

 1200)

Digital RGB:

1920 

 1080/50p, 1920 

 1080/59.94p

 

Analog signals cannot be input to this connector.
A DVI-I cable cannot be used.

Summary of Contents for AW-HS50N






























































































































Reviews:

No comments