manualshive.com logo in svg

Panasonic AW-HS50N, Operating Instructions Manual, Page: 57 / 125

Share
Download
Panasonic AW-HS50N Operating Instructions Manual Download Page 57

57

4. Input/output signal settings

4-2.  Setting the output signals

Signals can be output from the three connectors: SDI OUT 
1, SDI OUT 2 and DVI-D OUT.
The output signals are set on the [11] Output Menu of the 
OSD menu.

  5&+176

2)/

5&+176

289

&8+176

#7:

5&+176.KOKV

1HH

&8+1765K\G

#WVQ

&8+1765ECNG

(KV8

&8+176/XFGV

=?1WVRWV/GPW

4-2-1.  Assigning the output signals

[11] Output Menu
 1. 

SDI-OUT1

[11] Output Menu
 2. 

SDI-OUT2

[11] Output Menu
 3. 

DVI-OUT

The following assignment options are available.

PGM

This is the main line output of the switcher.
Images with wipe, mix, key, PinP or other effects 
added are output.

PVW

The PVW images which enable the next 
operation to be checked are output.

CLN

Clean signals (images resulting when the key and 
PinP effects have been removed from the PGM 
signal) are output.

AUX

The signal selected using the AUX bus is output.

MV

The multi view display signal is output.

KeyOut

The key signal is output.

4-2-2.  Setting the color areas

[11] Output Menu
 4. 

SDI-OUT:Limit

This is used to set the color area for the SDI output signal 
images.

Off

The color area is not subject to any limitations.

108

The amplitude level of each of the colors (R, G, B) is 
limited to between 0 % and 108 %.

104

The amplitude level of each of the colors (R, G, B) is 
limited to between 0 % and 104 %.

100

The amplitude level of each of the colors (R, G, B) is 
limited to between 0 % and 100 %.

4-2-3.  Setting the DVI-D output signals

The following setting is selected for DVI-D output signal 
images.

[11] Output Menu
 5. 

DVI-OUT:Size

This is used to set the resolution to be output.
The following resolutions are supported.

Supported resolutions

Auto

Using the DVI signals, the information of the 
device at the output destination is gathered, 
and the images are output at the optimum 
resolution.

p

The vertical frequency is set to 60 Hz, and 
the maximum resolution is WUXGA.

XGA

1024

C

768

WXGA

1280

C

768

SXGA

1280

C

1024

WSXGA+

1680

C

1050

UXGA

1600

C

1200

WUXGA

1920

C

1200

1080/59.94p

1920

C

1080

1080/50p

1920

C

1080

Summary of Contents for AW-HS50N






























































































































Reviews:

No comments