Panasonic AW-HN38HKP, Operating Instructions Manual

Page: 51 / 140

51
Camera menu items
(continued)
■
IP Network screen
### IP Network ###
IP Address
192. 168. 0. 10
Subnet Mask
255. 255. 255. 0
Default Gateway
192. 168. 0. 1
Return
IP Address
This is selected to display the IP address which has been
set for the unit.
Subnet Mask
This is selected to display the subnet mask which has
been set for the unit.
Default Gateway
This is selected to display the default gateway which has
been set for the unit.
●
On this screen, the IP Address, Subnet Mask and
Default Gateway settings can be displayed but they
cannot be changed.
To change an address, use “Network setup screen
[Network]” (page 90) on the Web setting screen or
“Use the Easy IP Setup Software to establish the unit’s
settings” (page 46 in the <Basics>).
Note
Return
Use this to return to the previous menu.
●
Concerning initialization
When “Initialize” is selected on the Maintenance screen, the
Initialize screen appears.
Initialize screen
### Initialize ###
Do you want to initialize Menu settings?
CANCEL
O.K.
Return
●
When the cursor is moved to “O.K.” on the Initialize
screen and the setting is entered, the Menu settings
initialized screen is displayed for 5 seconds, and the
camera settings are restored to the settings which were
established when the camera was purchased (“Camera
menu item table” (pages 52 to 54)).
However, the Format settings and Frequency settings
(page 44) and network settings are not initialized.
When the initialization operation is completed, the
Initialize screen is restored to the display.
●
The settings of the priority mode (page 44,
page 65) are not initialized.
Menu settings initialized screen
Menu settings initialized.
●
When the cursor is moved to “CANCEL” on the
Initialize screen and the setting is entered, the Menu
settings unchanged screen is displayed for 5 seconds,
the initialization operation is not performed, and the
Initialize screen returns to the display.
Menu settings unchanged screen
Menu settings unchanged.