Panasonic AW?HE60HN, Operating Instructions Manual

Page: 86 / 120

86
Controls and settings from web screen
(continued)
Priority stream screen
Selected on this screen are the settings for the priority stream which enables the images to be sent with no reduction in image
quality or image refresh speed even when a multiple number of users are accessing the unit at the same time.
●
Priority stream
Activation
<Initial setting: Off>
Whether to use priority stream transmission is set here
using “On” or “Off”.
● ●
If “On” has been selected as the priority stream
“Activation” setting, the number of users who are
allowed access may be limited.
Note
Destination IP address(1)
<Initial setting: blank>
The IP address of the first send destination is input here.
Destination IP address(2)
<Initial setting: blank>
The IP address of the second send destination is input
here.
Stream type
<Initial setting: JPEG>
JPEG or H.264 is set as the stream type here.
JPEG JPEG images are sent.
H.264
H.264 images are sent.
Refresh interval*
[1fps, 2fps, 3fps, 5fps, 6fps, 10fps, 15fps*, 30fps*]
<Initial setting: 1fps>
The speed at which the images are to be refreshed is set
here.
This setting takes effect only when “JPEG” has been
selected as the “Stream type” setting.
● ●
When “On” is selected as the “H.264 transmission”
(page 67) and a value with an asterisk (*) is selected,
the image refresh interval may become slower than
the value which is set.
Note
Image capture size [QVGA, VGA]
<Initial setting: VGA>
QVGA or VGA is selected here as the image resolution.
This setting takes effect only when “JPEG” has been
selected as the “Stream type” setting.