42
Network settings
(continued)
1
Start the Easy IP Setup Software.
2
Click the [Search] button.
3
Click the MAC address/IPv4 address of the
camera to be set, and click the [Network
Settings] button.
●
●
When a DHCP server is being used, the IP
address allocated to the unit can be checked by
clicking the [Search] button of the Easy IP Setup
Software.
●
●
If the same IP address is used for any additional
cameras, the numbers of the additional cameras
will be displayed in the “IPv4 overlap” column of
the cameras concerned.
●
●
When the [Access Camera] button is clicked, the
Live screen of the selected camera is displayed.
●
●
This unit does not support an IPv4/IPv6 switching
function. (It supports only IPv4.)
Notes
4
Input the network items, and click the [Save]
button.
●
●
When a DHCP server is being used, “DNS” of the
Easy IP Setup Software can be set to “Auto”.
●
●
This unit does not support the “AutoIP” connection
mode.
Notes
●
●
After the [Save] button is clicked, it takes about
2 minutes for the settings in the unit to be completed.
If the AC adaptor or LAN cable is disconnected
before the settings are completed, the settings will be
canceled. In this case, repeat the steps to establish
the settings.
●
●
When a firewall (including software) has been
introduced, enable access to all the UDP ports.
Summary of Contents for AW-HE60
Page 59: ...59 Memo ...
