15
Installation
Instructions
Removing the camera
1
Turn off the circuit breaker and power.
2
Remove the cable cover.
●
●
Remove the screw (M3) for the cable cover used to secure the cover.
●
●
Push the tab parts of the cover to disengage the cover.
3
Disconnect the cables.
Disconnect the power cable, video cable, and control cable, etc.
4
Remove the main unit mounting screw used to secure the unit and mount bracket.
5
Push the unit (
A
). Turn it approximately 15 degrees away from the installed position (
B
),
and remove it (
C
).
Main unit mounting
screw (M3 screw)
(with flat washer,
spring washer)
Approx.
15°
●
●
Do not do this work while holding the camera head since doing so may result in malfunctioning of the unit.
Note
6
Disengage the drop-prevention wire from the mount bracket.
Summary of Contents for AW-HE60
Page 59: ...59 Memo ...
