![background image](http://html1.mh-extra.com/html/panasonic/aw-he40hwp/aw-he40hwp_operating-instructions-manual_3676495053.webp)
53
Operating Instructions
Symptom
Cause and remedial action
Reference
pages
The images appear
jerky when the
1080/29.97PsF or
1080/25PsF format is
selected
●
Operation is problem-free.
What happens with the PsF (progressive segmented frame)
system is that the same images as the progressive system are
output by recording the same images in field 1 and field 2 so that
the resulting images may appear somewhat jerky.
–––
Something is wrong
with the coloring of
the pictures
●
Activate the ATW (Auto tracking white adjustment) function.
<Operations and
Settings>
P.19
●
In some situations, the proper colors may not be reproduced
using the ATW function.
In cases like this, proceed with the white balance adjustment.
<Operations and
Settings>
P.17 to 20
The pictures are too
light or too dark
●
Either select the auto setting for the iris or select the manual
setting and adjust the iris manually.
<Operations and
Settings>
P.14
The images are in
black and white
●
Is Night mode established?
In Night mode, the images are output in black and white.
<Operations and
Settings>
P.36, P.38, P.66
The auto white
balance adjustment
(AWB) does not work
●
Is Night mode established?
The auto white balance adjustment (AWB) cannot be used in Night
mode.
<Operations and
Settings>
P.17 to 19,
P.36, P.38, P.66
●
Is the scene mode set to [Full Auto]?
ATW is performed in Full Auto mode.
<Operations and
Settings>
P.9
The screen is
excessively bright
in Night mode
●
In Night mode, the iris is set to open as a measure to prevent
video spying. Adjust the brightness at the light source.
<Operations and
Settings>
P.36, P.38, P.66
The iris cannot be
operated in Night
mode
The subjects appear
distorted
●
Since this camera uses a MOS image device, the shooting timing
differs slightly at the top left and bottom right of the screen.
This means that if a subject has moved quickly across in front of
the camera, it may appear slightly distorted.
This is normal and not indicative of any problem.
–––
When the flash is fired
during shooting, only
the top or bottom of
the screen becomes
lighter
●
With a MOS image sensor, the shooting timing differs slightly
between the top left and bottom right of the screen.
This means that when the flash is fired, the bottom of the screen
will become lighter in the field concerned and the top will become
lighter in the next field.
This is normal and not indicative of any problem.
–––
Troubleshooting
(continued)
Summary of Contents for AW-HE40HWP
Page 62: ...62 Memo ...
Page 63: ...63 Memo ...