manualshive.com logo in svg

Panasonic AW-HE40HWP, Operating Instructions Manual

Share
Download
Panasonic AW-HE40HWP Operating Instructions Manual Download Page 58

58

Specifications

Power requirements:

   DC 12 V (Supplied AC adaptor)
   DC 42 V to 57 V (PoE+ power supply)

Current consumption:

  1.2 A (Supplied AC adaptor)
  0.4 A (PoE+ power supply)

 indicates safety information.

 

■

GENERAL

Ambient operating temperature: 

 

0 °C to 40 °C (32 °F to 104 °F)

Storage temperature:

  –20 °C to 50 °C (–4 °F to 122 °F)

Allowable humidity ranges: 

 

 20 % to 90 % (no condensation)

Mass:

 

Approx. 1.5 

kg

 (3.30 lb)

Dimensions (W x H x D): 
 

 160  mm 

x

 186 mm 

x

 166 mm 

(6-5/16 inches 

x

 7-41/128 inches 

x

 

6-17/32 inches) 
[excluding protrusions, direct ceiling 
mount bracket]

Finish:
 

 [AW-HE40HWP],  [AW-HE40SWP],   
[AW-HE40HWE], [AW-HE40SWE]

   

Pearl white

 

 [AW-HE40HKP],  [AW-HE40SKP],   
[AW-HE40HKE], [AW-HE40SKE]

   

Metallic black

Controller supported:

   AW-RP50, AW-RP120, AK-HRP200 

●

  It may be necessary to upgrade 

the version of the controller so that 
the controller will support the unit.

 

■

INPUT

Power:

 

 DC 12 V IN, 
PoE+ (IEEE802.3at standard)

Mic/line input:

  

Stereo mini-jack (ø3.5 mm)

   

Input impedance:

   

  Approx. 2 k

Ω

 (unbalanced)

  

[Mic input]

   

  Supported microphones:

   

     Stereo mic (plug-in power,  

on/off switching via menu)

   

  Supplied voltage:

   

    2.5 V ± 0.5 V

   

  Mic input level:

   

    –60 dBV ± 3 dBV

  

[Line input]

   

  Input level:

   

    –10 dBV ± 3 dBV

 

■

OUTPUT

Video output

[AW-HE40H]

HDMI:

 

HDMI connector

●

 HDCP is not supported.

●

 VIERA Link is not supported.

[AW-HE40S]

HD SDI OUT:

 

 Compliant with the SMPTE292M 
standards/75 

Ω

  

(BNC 

x

 1)

 

■

INPUT/OUTPUT

Input/Output connector

LAN:

 

 LAN connector for IP control (RJ-45)

 

 Equipped with straight/crossover 
cable auto detection function

RS-232C:

 

 Mini DIN 8-pin (IN) 
Mini DIN 8-pin (OUT)

RS-422:

 

 CONTROL IN RS422A (RJ-45)

USB:

 

 Mini-B  port   
(Used for maintenance)

SD card:

 

 microSD card slot  
(Used for maintenance)

Summary of Contents for AW-HE40HWP

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands