109
Recording to and playing back from a memory card
The unit can record and playback in MP4 format to/from the
following SD cards compliant with the SD standards.
●
Set the priority mode to “SD card” before use. For details,
refer to “Priority mode tab [Priority Mode]” (page 65).
●
IP control, IP video transmission, and PoE+ power
supply can be used at the same time as these
functions if you use a LAN cable. However, some
limitations will occur to IP video transmission compared
with when the priority mode is set to “IP”. For details,
refer to “Priority mode (Priority Mode)” (page 8,
page 44, page 65, page 115).
●
When the priority mode is “SD card”, the IP
transmission of H.264 images is not possible.
Notes
SD card type
Recording capacity
Speed class
microSDHC
4 GB to 32 GB
Speed class 10 or
higher
microSDXC
64 GB to 128 GB
●
SD Speed Class Rating is the speed standard regarding
continuous writing. Check via the label on the card, etc.
e.g.:
Folder structure
DCIM
100YAPHH
101YCPHH
102XAPHH
103XCPHH
104YBPHH
105YDPHH
106XBPHH
107XDPHH
1
to
8
:
Motion picture files in MP4
format
1
1920×1080/59.94p
(Frequency: 59.94Hz)
2
1920×1080/29.97p
(Frequency: 59.94Hz)
3
1280×720/59.94p
(Frequency: 59.94Hz)
4
1280×720/29.97p
(Frequency: 59.94Hz)
5
1920×1080/50p
(Frequency: 50Hz)
6
1920×1080/25p
(Frequency: 50Hz)
7
1280×720/50p
(Frequency: 50Hz)
8
1280×720/25p
(Frequency: 50Hz)
●
The folder names and file numbers are initialized each
time an SD card is formatted (initialized).
Note
Inserting and ejecting an SD card
(optional accessory)
Connector panel
●
Orient the connector panel in the direction shown in the
diagram and then insert the SD card straight all the way in
until you hear a click.
●
To eject the SD card, push until you hear a click and then
pull the SD card straight out.
Recording
When an SD card that has been used with another device
is to be used with the unit for the first time, format (initialize)
the SD card before use. Furthermore, when a commercially
available SD card is to be used for the first time, be sure to
format (initialize) it with the unit.
For details, refer to “Format” (page 67).
1.
Set the priority mode to “SD card”.
●
“Priority mode tab [Priority Mode]” (page 65)
2.
Set the format for the video to be recorded.
●
“Setting the format for the video to be recorded”
(page 110)
3.
Click [Live] on the Web screen and then click
[Other Menu >>].
