5.
Check the mounting.
6.
Connect the rear panel connectors.
When three coaxial cables are to be connected, connect coaxial cable [2] first.
RS
- 422
10BASE
- T/1
00BASE
- TX
IR ID
RS
- 232C
IN
OUT
SIG
NAL G
ND
Coaxial cable [3]
Coaxial cable [2]
Coaxial cable [1]
HDMI cable
AC adaptor cable
Square hole
(one at either side)
Tab (one at either side)
Screw for cable cover (M3 screw)
(with flat washer, spring washer)
LAN cable
LAN cable
RS‑232C cable
RS‑232C cable
z
How to secure the AC adaptor cable
A
Loosely secure the cable clamp.
Cable clamp
Loosely secure the cable clamp
in the area shown above.
B
Fasten the cable clamp.
Strap part
Take hold of the strap part, slide
the cable clamp until it stops
moving, and then secure it tightly.
7.
Attach the cable cover.
• Fit the two tabs on the cable cover into the square mounting hole at either side of the rear panel.
• Secure the cable cover using the screw (M3 x 25 mm) provided.
Screw
diameter
Clamping torque
M3
0.78 N · m (8 k
g
f · cm)
<NOTE>
• Engage the tabs on the cable cover so they fit into place perfectly, and check that the cover is not rickety.
• When attaching an anti-theft wire, do so after attaching the cable cover.
14
15
Stand‑alone installation (when the mount bracket is going to be used) (continued)
