System example 4 (connection with commercially available controller, RS‑232C daisy‑chain connection)
HD Integrated Camera AW‑HE130
*
1
Commercially
available
controller
Accessory AC adaptor
Accessory
AC adaptor
Accessory AC adaptor
RS‑232C
communication
connector
Up to 7
*
1
You can connect up to seven cameras to the commercially available controller.
RS‑232C
communication
connector
• Configure the service switches at the bottom of the unit.
For details on the service switches, see “Service switch settings” (→ page 6).
SW1 to SW3: Set the camera address to AUTO or 1 to 7.
(Set address numbers so that they do not duplicate each other.)
SW4:
Enable standard serial communication (ON).
SW7:
Set the baud rate to 9600 bps (OFF) or 38400 bps (ON) based on your commercially available contoller.
SW8:
Set the communication connector to RS-232C (ON).
• Configure the following items in the camera menu.
1.
Display [System] menu - [Protocol] - [Model Select].
2.
Select [SEVIHD1], [SBRC300], or [SBRCZ330] for the protocol type.
22
Connections (continued)
23
