Panasonic AW-HE120KE Operating Instructions Manual Download Page 41

Page: 41 / 100

Camera menu

Setting the camera menu items

(continued)





Picture 2/3 screen

Picture 2/3

Detail High
H Detail Level H 15
V Detail Level H 15
H Detail Level L 8
V Detail Level L 8
Detail Band 3
Noise Suppress 0
FleshTone NoiseSUP. Off

Return

Detail [Off, Low, High]

The image detail (image sharpness) is adjusted here.
When “High” is selected, the detail is enhanced.

H Detail Level H
[H Detail Level L setting value +1 to 63]

This is selected to adjust the horizontal detail
compensation level when “High” has been selected as the
“Detail” setting.

V Detail Level H
[V Detail Level L setting value +1 to 31]

This is selected to adjust the vertical detail compensation
level when “High” has been selected as the “Detail” setting.

H Detail Level L
[1 to H Detail Level H setting value –1]

This is selected to adjust the horizontal detail
compensation level when “Low” has been selected as the
“Detail” setting.

V Detail Level L
[1 to V Detail Level H setting value –1]

This is selected to adjust the vertical detail compensation
level when “Low” has been selected as the “Detail” setting.

Detail Band [1 to 5]

This is selected to set the boost frequency for Detail.

Low frequency

High frequency

When a high frequency is selected, the detail effect is
added to subjects with more definition.

Noise Suppress [0 to 7]

This is selected to reduce the screen noise which is
generated by the detail effect.
The higher the settings, the more the noise is reduced.

FleshTone NoiseSUP. [Off, Low, High]

This function is selected to make the skin of the subjects
to be shot appear to be smoother and more attractive.
When “High” is selected, the effect is enhanced.

Return

Use this to return to the previous menu.

Summary of Contents for AW-HE120KE





































































































Search results

Summary of Contents for AW-HE120KE

Reviews:

Related manuals for AW-HE120KE

Brands by name

Popular brands

Panasonic AW-HE120KE, Operating Instructions Manual

Search results

Summary of Contents for AW-HE120KE

Reviews:

Related manuals for AW-HE120KE

Brands by name

Popular brands