Panasonic AW-HE120KE Operating Instructions Manual Download Page 8

Page: 8 / 100

How to turn the power on and off

(continued)





Turning the power off

When performing the operations

using the wireless remote control

Press one of the [CAM1] to [CAM4] buttons on
the wireless remote control to select the unit.

Press the [ON/STANDBY] button on the
wireless remote control for 2 seconds.

The unit is set to the standby mode.





The unit’s status display lamp now lights up orange.

If a multiple number of units are going to be
used, repeat steps

and

as required.

Set all the power switches of the units and
devices connected in the system to OFF.





This unit does not have a power switch.





When operation is transferred to the STANDBY
mode: The current zoom, focus and iris positions
are stored in the memory (POWER ON preset).





When operation is transferred to the POWER ON
mode: The zoom, focus and iris are adjusted to
the positions which were stored in the memory
(POWER ON preset) when operation was
transferred to the STANDBY mode.

Notes

When performing the operations using the controller

When the AW-RP655 or AW-RP555 is connected:

Set the [OPERATE] switch on the controller to
OFF.

All the cameras (including the unit) connected to the
controller are set to the standby mode.





The unit’s status display lamp now lights up orange.

Set all the power switches of the units and
devices connected in the system to OFF.





This unit does not have a power switch.





When operation is transferred to the STANDBY
mode: The current zoom, focus and iris positions
are stored in the memory (POWER ON preset).





Notes

For further details, refer to the Operating Instructions of the
controller.

When the AW-RP50 is connected:

Refer to the Operating Instructions of the controller.

Summary of Contents for AW-HE120KE





































































































Search results

Summary of Contents for AW-HE120KE

Reviews:

Related manuals for AW-HE120KE

Brands by name

Popular brands

Panasonic AW-HE120KE, Operating Instructions Manual

Search results

Summary of Contents for AW-HE120KE

Reviews:

Related manuals for AW-HE120KE

Brands by name

Popular brands